Equipment function and introduction

Cell strings laying up machine, of which modules are conveyed in & out along with the long side, working with Stringer by 1 VS 1, or 1 VS 2.Cell strings are in parallel with the long side of the modules after conveyed in the Automatic Layup Machine, and adjusted mechanically. There are 4 types of Automatic Layup Machine for customers to choose,1300 pieces,2600 pieces,3000 pieces,4000 pieces. The equipment applies to automatic laying of three modules,96 pieces,72 pieces, and 60 pieces. Single layup system.

1) Receiving the cell strings outputted from the upstream equipment Auto Stringer.

2) Pick up the cell string and put it in the adjusting mechanism.

3) Adjust position of cell string.

4) Receiving glass and EVA from production line.

5) Adjust position of glass.

6) Pick up the cell string from the adjusting mechanism.

7) Laying the cell strings on the glass and EVA according to positive and negative polarity accurately (cell strings can be ranged horizontally or vertically on the glass).

8) Outputting the modules after finishing laying.

Equipment key performance specifications

1) Power Supply: three phase five wire 380v/50Hz

2) Power: Peak Value 5KW.Average Value about 2.2KW.

3) Air Source: Pressure 0.5-0.8MPa  Flow 1000L/min  Access devices pipe diameter Φ8(when single machine running)

4) Environmental Requirement:    Temperature:18-30℃   Humidity:＜75% no condensation

5) Applicable modules specifications: length(1574-1950)mm x width(802-986)mm

6) Noise: ＜72db